Entering Pin Code For Authentication; Use Preset Pin - CipherLab Cipher Lab 1560 User Manual

1560 Series Barcode Scanner

ENTERING PIN CODE FOR AUTHENTICATION

USE PRESET PIN

1) In the configuration mode, read the barcode below to use a preset PIN for
authentication.
2) Read one of the barcodes to specify the PIN code, in decimal or hexadecimal.
By default, the PIN code is set to "0000". Maximum 16 characters are allowed.
3) Read the "Decimal
on page 228 for the desired digits or character string.
Read the "Clear PIN Code" barcode first if you need to re-input the PIN code.
4) Read the "Validate" barcode to complete this setting.
230
User Guide
Value" barcode on page 227 or the
Use Preset PIN
Enter PIN in
Hexadecimal...
Enter PIN in
Decimal...
"Hexadecimal
Clear PIN Code
Enter Setup
Value" barcode