Create One-Scan Setup Barcodes; One-Scan Barcode - CipherLab Cobia User Manual

1504B Barcode Scanner

CREATE ONE-SCAN SETUP BARCODES

The fact is most of the scanner parameters require only one read for setting new values.
To facilitate configuring the scanner, create One-Scan setup barcodes for use.
1D ONE-SCAN BARCODE
The requirements of a One-Scan setup barcode are:
a prefix of the "#@" characters

the six digits of command parameters

a suffix of the "#"character

For example, the scanner needs reading three setup barcodes for the command
parameter "109952" to take effect:
Now, it requires only one read:
Note: The scanner will restart automatically upon reading the One-Scan setup barcode
for changing the interface. It will respond with a long beep and its LED will come
on-off shortly.
14
User Guide
Enter Setup
One-Scan Setup Barcode
for 109952
List Page 3
Update
Enter Setup