Prefix/Suffix Code - CipherLab 2560 User Manual

2560 Series Barcode Scanner

5.3 PREFIX/SUFFIX CODE

By default, there is no prefix code, and [ENTER] or [CR] (Carriage Return) is configured
to be suffix code. Up to 8 characters can be configured, for example, "Barcode_", and
you will have the
"Barcode_1234567890".
If "BT HID", "USB HID" or "Keyboard Wedge" is configured for interface,

and Key Status
Key Status when "Normal Key" is selected for Key Type.
Key Type
Scan Code Up to
allowed.
Normal Key Up
allowed.
1) Read the barcode above to apply prefix code or suffix code separately, and follow
steps 2~3. (Max. 8 characters each)
2) Read the "Hexadecimal
For example, read "2" and "B" for the scanner to prefix or suffix the character [+].
3) Read the "Validate" barcode to complete this setting.
168
User Guide
string appear
will then become applicable. You may decide whether or not to apply
4 scan code values
to 8 character strings
Value" barcode on page 228 for the desired character string.
in front of the
Key Status
are N/A

are Add Shift
 Add Left Ctrl
 Add Left Alt

Add Right Ctrl
 Add Right Alt
Refer to Keyboard Wedge
Configure Prefix
Configure Suffix
barcode read, like
Table.
Enter Setup
this –
Key Type