Prefix/Suffix Code - CipherLab 1564 User Manual

1564 Barcode Scanner

5.3 PREFIX/SUFFIX CODE

By default, there is no prefix code, and [ENTER] or [CR] (Carriage Return) is configured
to be suffix code. Up to 8 characters can be configured, for example, "Barcode_", and
you will have the string
"Barcode_1234567890".
If "BT HID", "USB HID" or "Keyboard Wedge" is configured for interface,
and Key Status
Key Status when "Normal Key" is selected for Key Type.
Key Type
Scan Code Up to 4 scan code values are allowed.
Normal Key Up to 8 character strings are allowed.
1) Read the barcode above to apply prefix code or suffix code separately, and follow
steps 2~3. (Max. 8 characters each)
2) Read the "Hexadecimal
For example, read "2" and "B" for the scanner to prefix or suffix the character [+].
3) Read the "Validate" barcode to complete this setting.
186
User Guide
appear
will then become applicable. You may decide whether or not to apply
Value" barcode on page 264 for the desired character string.
in front of the
Key Status
N/A
Add Shift
Add Left Ctrl
Add Left Alt
Add Right Ctrl
Add Right Alt
Refer to Keyboard Wedge Table.
Configure Prefix
Configure Suffix
barcode read, like
Enter Setup
this –
Key Type