Character Substitution - CipherLab 2560 User Manual

2560 Series Barcode Scanner

5.2 CHARACTER SUBSTITUTION

Character substitution is performed on every occurrence of the first character specified. If
only one character is specified, every occurrence of that character in the barcode will be
taken away.
The first character will be replaced by the second character(s).

Up to three sets of character substitution can be configured.

If "BT HID", "USB HID" or "Keyboard Wedge" is configured for interface,

and Key Status
Key Status when "Normal Key" is selected for Key Type.
Key Type
Scan Code Only 1 scan code value is allowed.
Refer to
Character
Normal Key Up
allowed.
Note: The character substitution is performed only on the barcode itself and before the
processing of editing formats. It is not applicable to the Prefix/Suffix Code, Code
ID, Length Code, or any Additional Field.
160
User Guide
will then become applicable. You may decide whether or not to apply
5.2.1 Select a Set for
Substitution.
to 3 character strings
Key Status
N/A

are Add Shift
 Add Left Ctrl
 Add Left Alt
 Add Right Ctrl
 Add Right Alt
Refer to Keyboard Wedge
Enter Setup
Key Type
Table.