24-18
Program Motion Control
2.
Publication 1756-UM001E-EN-P - August 2002
Display the Properties for the Axis
+
Controller
+
Tasks
−
Motion Groups
−
Name_of_New_Group
name_of_axis
Ungrouped Axes
Trends
Complete the Hookup Tests
1.
1. Click the Hookup tab.
2. Type number of increments that the axis moves during each test.
3. Select each test and follow the prompts.
4. When you finish the hookup tests, choose OK.
For more information about hookup diagnostics, see the ControlLogix
Motion Module Setup and Configuration Manual, publication
1756-UM006.
Right-click and select Axis
Properties.
43034
3.