Allen-Bradley ControlLogix System 1756-L1 User Manual page 386

24-6 Program Motion Control
11.
Publication 1756-UM001E-EN-P - August 2002
1756-M02AE
10. Choose New Axis.
11. Type a name for the axis and choose OK.
12. Assign the axis to a channel (the physical connection on the
servo module to which the axis is wired).
13. Repeat steps 10 - 12 for the other channel, if required.
14. Choose Finish.
1756-M08SE
15.
16.
15. How many axes are connected to this module? (In the next
section, you associate the axes with the module.)
If this number of axes:
1 - 4
5 - 8
16. Select the intensity of the light beam on the fiber optic cable. For
cables that span long distances or cables that are low quality,
select High.
17. Choose Finish.
10.
43017
Then select a Cycle Time of:
1
2
43031