Allen-Bradley ControlLogix System 1756-L1 User Manual page 137

Allen-Bradley HMIs
Communicate with an RSView Project over an EtherNet/IP Network
G. On the Communication tab, specify the following parameters:
For this item:
Communication Method
Source Link
Destination Link
Destination Node
H. Click OK.
Type or select:
CIP With Source ID
Remote ID from "Create a Unsolicited Topic,
step L."
Virtual Link ID from "Create a Unsolicited Topic,
step D."
77 (RSLinx reserves node 77 for DDE topics.)
Publication 1756-UM001E-EN-P - August 2002
7-21