1-14
Configure an EtherNet/IP Module
Publication 1756-UM001E-EN-P - August 2002
2. Expand a network until you see the module.
3. Right-click the module and choose Module Configuration.
4. Click the Port Configuration tab.
5.
6.
7.
8.
10.
11.
5. Clear (uncheck) the Obtain IP Address from Bootp Server check
box.
6. Type the IP address for the module.
7. Type the subnet mask for the module, if you need one.
8. Type the gateway address for the module, if you need one.
−
Workstation
+
Linx Gateways, Ethernet
−
AB_DF1-x, DF1
−
xx, 1756-Lx
−
Backplane, 1756-Ax
+
xx, 1756-ENB
42472