20-6
Communicate Over a Remote I/O Network
Add a Remote I/O Adapter
Publication 1756-UM001E-EN-P - August 2002
In this task, you add remote I/0 adapters for each rack, or portion of a
rack, in the chassis:
If the chassis contains:
less than 1 rack of I/O
1 rack of I/O
more than 1 rack of I/O
Add remote I/O adapters
EXAMPLE
The I/O configuration of the controller requires two
remote I/O adapters for this chassis. One adapter is
for rack 1, and the second adapter is for the 1/2 of
rack 2.
1
7
7
1
A
S
B
−
I/O Configuration
−
[x] 1756-DHRIO/x name_of_DHRIO
1. Right-click name_of_DHRIO and select New Module.
2. Select an adapter module and click OK.
If the I/O is:
1747
1771
1791
1794
Then add:
1 adapter for the chassis
1 adapter for each rack
rack 1
0
1
2
3
4
5
6
Then select:
1747-ASB
1771-ASB
RIO-ADAPTER
1794-ASB
rack 2
7
8
9
10 11