L.
O.
Allen-Bradley HMIs
J. Click Apply.
K. Click the System Protocol tab.
L. Select DF1 Slave.
M. Select the error detection method that your equipment uses.
N. Do you want to receive duplicate messages?
If:
Then:
Yes
Leave the Enable Duplicate Detection selected.
No
Clear the Enable Duplicate Detection check box.
O. Type an address between 0 and 254 for this controller.
P. Click OK.
Configure DF1 Master and Slave Communications
Publication 1756-UM001E-EN-P - August 2002
22-11
M.
N.
42388