3-2
Communicate with 1756 I/O over an EtherNet/IP Network
How to Use This Procedure
Publication 1756-UM001E-EN-P - August 2002
If the all the I/O modules are in the same chassis as
IMPORTANT
the controller (no remote I/O), go to Add I/O
Modules on page 3-8.
If you have not already done so in a previous procedure, do the
following preliminary tasks:
• Add the Local 1756-ENBx or -ENET Module
• Add the Remote 1756-ENBx or -ENET Module
To complete this procedure, do the following tasks:
• Add I/O Modules
• Create Aliases
• Validate Connections