Allen-Bradley ControlLogix System 1756-L1 User Manual page 355

M.
P.
Q.
R.
S.
U.
V.
Allen-Bradley HMIs
K. Click Apply.
L. Click the System Protocol tab.
M. Select DF1 Master.
N. Select the error detection method that your equipment uses.
O. Do you want to receive duplicate messages?
If: Then:
Yes Leave the Enable Duplicate Detection selected.
No Clear the Enable Duplicate Detection check box.
P. Type an address between 0 and 254 for this controller.
Q. Is it critical to keep the poll list scan time to a minimum?
If: Then select:
No Standard (multiple message transfer per node scan)
Yes Standard (single message transfer per node scan)
Configure DF1 Master and Slave Communications
Publication 1756-UM001E-EN-P - August 2002
22-5
N.
O.
T.
42388