Allen-Bradley ControlLogix System 1756-L1 User Manual page 109

Address PanelView data
EXAMPLE
This rung uses these I/O tags of the PanelView: pv_a:I.Data[2].0 and pv_a:I.Data[2].1. The rung
controls a motor.
When a push button on the PanelView is pressed, this rung clears a value. The push button uses bit 4
of the screen_a_bit array.
This rung moves counter.ACC (a DINT value) to element 5 of the screen_a_DINT array. A numeric
display on the PanelView shows the value.
alarm_ack and alarm are aliases for the I/O tags of the PanelView.
Allen-Bradley HMIs
Communicate with a PanelView
To address the PanelView data in your logic, you can have the
following options:
• address the tags directly
• copy the tags to other tags in your project
• create alias tags
™
Terminal Over a EtherNet/IP Network
Publication 1756-UM001E-EN-P - August 2002
6-9
42857