Allen-Bradley ControlLogix System 1756-L1 User Manual page 97

Allen-Bradley HMIs
Communicate with Another Controller over an EtherNet/IP Network
J. Repeat steps F. through I. until you have specified the
destination controller.
The following examples depicts a communication path:
Communication path from a Logix5000 controller to
EXAMPLE
a Logix5000 controller over an EtherNet/IP network
Ethernet network
5 E
5 N
5 E
0 T
washer, 2, 127.127.127.12, 1, 0
where:
washer
2
127.127.127.12
1
0
5 E
5 N
Message
5 E
0 T
indicates:
name of the ENB or ENET module
Ethernet port of the ENB or ENET module
IP address of the ENB or ENET module in the
destination chassis
backplane port of the ENB or ENET module in
the destination chassis
slot number of the destination controller
Publication 1756-UM001E-EN-P - August 2002
5-21
IP address
127.127.127.12