Allen-Bradley ControlLogix System 1756-L1 User Manual page 57

Allen-Bradley HMIs
J. Initially, do you want the module to communicate with the
controller?
If: Then:
Yes Leave the check box cleared
(unchecked).
No Select the check box.
K. If communication with the module fails, how do you want the
controller to respond?
If communication with a module fails, the
ATTENTION
controller operates on old data from the
!
module. To avoid potential injury or damage,
either monitor communications with modules
or configure modules to produce a major fault
if communications fail.
If you want the
controller to:
fault (major fault)
continue operating
L. Click Finish.
Communicate with 1756 I/O over an EtherNet/IP Network
Notes:
When you test this portion of the
system, clear the check box.
Then:
Select the check box.
Leave the check box
cleared (unchecked).
Publication 1756-UM001E-EN-P - August 2002
3-11
Notes:
Monitor the connection
using ladder logic.