Allen-Bradley ControlLogix System 1756-L1 User Manual page 27

42423
Allen-Bradley HMIs
7. Will you use host names to specify other EtherNet/IP devices?
(I.e., When you send a message or configure a remote ENB or
ENET module, will you use a host name instead of an IP
address?)
If: Then:
Yes Go to step 8.
No Go to step 10.
8. .Type the name of the domain of the module.
9. Type the IP address of the server or servers that contain the DNS
database for the domain.
10. Choose Set.
A dialog box asks you to confirm your changes.
11. To apply your changes, choose OK.
12. To close the Module Properties dialog box, choose OK.
Configure an EtherNet/IP Module
Publication 1756-UM001E-EN-P - August 2002
1-11
8.
9.
10.