Allen-Bradley ControlLogix System 1756-L1 User Manual page 323

3.
5.
10.
11.
Allen-Bradley HMIs
3. Type a name for the adapter module. Use a name that identifies
the I/O of this adapter.
4. Type or select rack number of this module.
5. Select the channel on 1756-DHRIO module that is network is
connected to.
6. Type or select the starting group number.
7. For the rack number of this adapter, select the number of groups
in this chassis. Round up to the nearest even number of groups.
8. Click Next.
9. Type the rate at which the I/O of this adapter must update.
10. Initially, do you want the module to communicate with the
controller?
If: Then:
Yes Leave the check box cleared
(unchecked).
No Select the check box.
Communicate Over a Remote I/O Network
9.
Notes:
When you test this portion of the
system, clear the check box.
Publication 1756-UM001E-EN-P - August 2002
20-7
4.
6.
7.
42441
42401