10-8
Communicate with 1794 I/O Over a ControlNet
Publication 1756-UM001E-EN-P - August 2002
™
Network
H. Click Next.
J.
K.
F.
I. In step
, did you select Rack Optimization as the Comm
Format?
If:
No
Yes
J. Initially, do you want the module to communicate with the
controller?
If:
Then:
Yes
Leave the check box cleared
(unchecked).
No
Select the check box.
I.
Then:
Type the rate at which the fastest device that is wired to
the module must update.
• Use a power of two times the ControlNet NUT.
• For example, if the NUT is 5 ms, type a rate of 5,
10, 20 ms, etc.
No RPI is required. Go to the next step.
Notes:
When you test this portion of the
system, clear the check box.
42401