Add the local 1756-ENBx or
-ENET module
Allen-Bradley HMIs
1. Open the RSLogix 5000 project offline.
2. Is the local ENB or ENET module already in the I/O
configuration of the controller?
If:
Then:
Yes
Go to Add the Remote 1794-AENx Module.
No
Right-click I/O Configuration and select New Module.
3. Select your type of ENB or ENET module and choose OK.
Communicate with 1794 I/O Over an EtherNet/IP Network
42376
Publication 1756-UM001E-EN-P - August 2002
4-3