3-14
Communicate with 1756 I/O over an EtherNet/IP Network
Publication 1756-UM001E-EN-P - August 2002
When you finish, the Tags window should look similar to the
following:
Tag Name
start
start is an alias for point 1 of the input module that is in slot 1 of a remote chassis (named
conveyor).
Even if the I/O module uses the Rack Optimization Comm Format,
TIP
address the required point as described in step F.
Tag Name
start
start is an alias for point 1 of the input module that is
in slot 1 of a remote chassis (named conveyor).
However, the ladder logic displays the address of the data within the
structure for the communication module (e.g., ENB, CNB):
Alias For
conveyor:1:I.Data.1(C)
Alias For
conveyor:1:I.Data.1(C)
Because the module uses the Rack Optimization format, a structure
associated with the communication module in the remote chassis
actually transfers the data.
<conveyor:I.Slot[1].Data.1>
Base Tag
conveyor:1:I.Data.1(C)
Base Tag
conveyor:I.Slot[1].Data.1(C)
start
42435