Allen-Bradley ControlLogix System 1756-L1 User Manual page 107

10.
11.
Allen-Bradley HMIs
Communicate with a PanelView
9. Type the rate that you want time-critical data to transfer with the
PanelView terminal.
10. Initially, do you want the module to communicate with the
controller?
If: Then:
Yes Leave the check box cleared
(unchecked).
No Select the check box.
11. If communication with the modules fails, how do you want the
controller to respond?
If you want the
controller to:
fault (major fault)
continue operating
12. Click Finish.
™
Terminal Over a EtherNet/IP Network
9.
Notes:
When you test this portion of the
system, clear the check box.
Then: Notes:
Select the check box.
Leave the check box Monitor the connection
cleared (unchecked). using ladder logic.
Publication 1756-UM001E-EN-P - August 2002
6-7
42401