Allen-Bradley ControlLogix System 1756-L1 User Manual page 203

Step 1: Add the 1756-CNB
Module
D.
Allen-Bradley HMIs
Communicate with Another Controller over a ControlNet
A. Open the RSLogix 5000
B. Right-click I/O Configuration and select New Module.
C. Select your type of CNB and click OK.
D. Type a name for the module (i.e., name_of_local_cnb ).
E. Type or select the slot number where the module is installed
F. How closely must any module in this slot match the information
on this tab?
If this information must match:
all, including minor revision number
all except the minor revision number
none
G. Click Next.
™
project offline.
42376
Then select
Exact Match
Compatible Module
Disable Keying
Publication 1756-UM001E-EN-P - August 2002
™
Network 11-3
E.
F.
42377