Allen-Bradley ControlLogix System 1756-L1 User Manual page 320

20-4 Communicate Over a Remote I/O Network
Publication 1756-UM001E-EN-P - August 2002
8. How closely must any module in this slot match the information
on this tab?
If this information must match:
all, including minor revision number
all except the minor revision number
none
9. Click Next.
11.
12.
10. Type the rate at which the module must communicate with the
controller.
11. Initially, do you want to prevent the module from
communicating with the controller?
If:
Yes
No
EXAMPLE
Then select
Exact Match
Compatible Module
Disable Keying
10.
Then:
Select the check box.
Leave the check box cleared (unchecked).
Inhibit a module
Use the Inhibit Module check box to make it
easier to test a system:
• Initially, inhibit the module.
• When you are ready to test the devices that
are associated with the module, clear the
check box.
42401