Installation - Festo YXC Series Description

7

Installation

7 Installation
7.1 Safety instructions
Note
A prerequisite for the electrical installation is a completely mounted and aligned hand­
ling system.
Note
The power supply is not switched off.
Damage to the product from incorrect handling.
• Never disconnect the plug connectors and electrical interfaces when powered.
• Never connect the plug connectors and electrical interfaces when powered.
• Observe the handling specifications for electrostatically sensitive devices.
Warning
Faulty installation of electrical components.
Injury due to electric shock. Damage to the product.
Installation may only be performed by qualified specialized personnel who are familiar
with:
– installation and operation of electrical control systems
– the documentation for the product.
Danger
Injury (death) due to electric shock.
• Switch off all supply lines and verify they are free of voltage prior to mounting, in­
stallation and/or maintenance work and secure them from being switched back on.
• Only use power sources which guarantee reliable electrical isolation of the operating
voltage in accordance with EN 60204-1 (PELV).
• Connect all PE protective conductors before commissioning.
• Observe the regulations of EN 50178 and EN 60204-1 for protective earthing in
installation.
• After the power supply is switched off:
Start work on plug connectors and interfaces only when the residual voltage has
fallen to a harmless level (è documentation of the controller used).
• Switch the power supply back on only after completion of work.
96 Festo – GDCP-YXC-EN – 1506a – English