7
Installation
Danger
If there is an error, conducting parts are touched.
Injury (death) due to electric voltage.
Observe requirements for the electrical equipment in accordance with EN 60204-1.
Include the handling system in the system potential equalisation at the protective
earth connection.
Note
Installation of the pneumatic components may only be performed by qualified special
ized personnel who are familiar with:
– installation and operation of pneumatic systems.
Caution
Compressed air tubing is not mounted properly. Product is pressurised. Compressed air
tubing gets loose and lashes out.
Injury due to whipping.
Cut hoses off at right angles.
Push hoses into the fitting up to the stop.
Check hoses for tight fit.
Festo – GDCP-YXC-EN – 1506a – English
97