Festo YXC Series Description page 85

5 Installation of the planar surface gantries and the three-dimensional gantries
For motor position in the middle
1
Connecting tube (2x)
2
Screw (12x)
3
Coupling (4x)
4
Clamping screw (2x)
1) Plug only for size 185
Requirements
– X-axes of the X-module are mounted and aligned
(è 5.3.1 Mounting of the X-module EHMX-RP),
(è 5.4 Installation of the planar surface gantries and the three-dimensional gantries (completely mounted)).
– Y-module is mounted and aligned
(è 5.3.2 Mounting of the Y-module EHMY-RP),
(è 5.4 Installation of the planar surface gantries and the three-dimensional gantries (completely mounted)).
– Hollow shafts are aligned.
Festo – GDCP-YXC-EN – 1506a – English
1 2
7
3
5
Drive shaft (2x)
6
1)
Plug (4x)
7
Gear unit/motor
6
5
4
85