Commissioning
4.3
Connecting elements
IO-Link Ports [X0] ... [X3] connection
M12 socket, 5-pin, A-coded
Tab. 4: IO-Link connection Ports
If there is a connection to other circuits at one of the connections for inputs or outputs, the circuits
must also comply with SELV/PELV.
4.4
Function
The module provides four IO-Link Ports Class B (type B) for connecting IO-LinkDevicesto an automa-
tion system CPX-AP.
The module response can be parameterised è 8 Parameterisation.
Status and error messages are indicated by LED displays on the module and reported to the interface
by the system communication.
5
Mounting
•
Carry out assembly according to the "Automation system CPX-AP-A operating instructions" è 1.1
Applicable documents.
6
Installation
•
Carry out installation according to the "Automation system CPX-AP-A operating instructions"
è 1.1 Applicable documents.
•
When connecting Devices Class A with 4 or 5-pin cables, do not connect pins 2 and 5.
7
Commissioning
•
Commission the automation system CPX-AP-A in accordance with the "Instruction manual for
automation system CPX-AP-A" è 1.1 Applicable documents.
Festo — CPX-AP-A-4IOL-M12 — 2023-01
Signal
1
L+
+24 V DC sensor supply
2
P24
+24 V DC load voltage supply
3
L–
0 V DC sensor supply
4
C/Q
Standard IO (in SIO mode) or IO-Link communication (in
IOL mode)
5
N24
0 V DC load voltage supply
7