Festo YXC Series Description page 49

5 Installation of the planar surface gantries and the three-dimensional gantries
• Prepare mounting option on mounting surface.
Mounting kit is movable. If required, change dimension X2.
EHMX-EGC-
Dimensions [mm] Y1
Y2
X1
X2
X3
G1
Depth of thread  6
1) By = width in Y-direction (è 1.1 Technical data)
2) Hx = stroke in X-direction (è 1.1 Technical data)
3) n = total number of mounting components for both X-axes (è 5.1.2 Number n of mounting components)
For X-module with motor position in the middle:
Caution
Unfastened motor in the middle turns with the shaft.
Injury due to impact or pinching. Damage to the product.
• Place motor outside the movement range.
• Fasten gear unit sufficiently.
• Prepare mounting option.
The drive shafts of the gear units and the hollow shafts must be sufficiently aligned
(è 5.6.1 Mounting of the connecting shaft).
EHMX-EGC-...-M
Dimensions [mm] H1
L
B
G2
Depth of thread G2 14
Festo – GDCP-YXC-EN – 1506a – English
50
1)
By + 108
60
2)
Hx + 51
3)
(X1 – X3) / [(n / 2) – 1]
50
M3
80
– 0.5
70
M8
80 120
By + 182 By + 280
100 160
Hx + 146 Hx + 224
68 106
M5 M8
 8  13
120
7.6
100
M10
16
185
By + 386
200
Hx + 310
106
M8
 13
185
26.5
110
M10
20
49