Earthing - Festo YXC Series Description

7 Installation
7.2

Earthing

7.2.1 Earthing points
There are earthing points labelled with the earth
symbol on the handling system for earthing.
The illustrations show the approximate positions of the earthing points. The positions of the earthing
points can deviate depending on the order.
For partially mounted handling systems
When mounting, the earthing points must be connected correspondingly to the accompanying earthing
cables.
For completely mounted handling systems
The earthing points are already connected to the earthing cables.
Note
• Observe national regulations.
• Pay attention to installation of the earthing cables in the energy chains
(è 7.3 Cables and hoses).
1. Emplace serrated washer.
2. Place cable lugs of the earthing cables between serrated washer and washer.
3. Tighten nut or bolt (tightening torque 4 Nm).
2 1
1
Serrated washer
98
2
1
2 1
2
Washer
Festo – GDCP-YXC-EN – 1506a – English