5
Installation of the planar surface gantries and the three-dimensional gantries
5.7
Motor with brake (
Dismounting is required only for a motor with brake so the slides can be moved to align the system.
A motor without brake can remain mounted.
5.7.1
Dismounting
For motor position left/right, the motor is located on an X-axis.
Unscrew screws.
Remove motor from the X-axis.
5.7.2
Mounting
Push motor onto the X-axis.
Check: correct position of the coupling hubs in
relation to each other.
Connect motor flanges together.
Tightening torques
M4: 3 Nm
M6: 10 Nm
M8: 18 Nm
94
)
EMMS-...-RSB/RMB
Festo – GDCP-YXC-EN – 1506a – English