Cleaning - Festo YXC Series Description

10 Maintenance and care
Warning
Compressed air tubing or attachments are set free under pressure. Movable parts move
uncontrollably.
Injury (death) due to impact or pinching.
• Switch off the compressed air supply prior to mounting work.
• Support movable pneumatic components, if needed.
• Vent all pneumatic components completely, e.g. through appropriate components,
such as non-return valves, service unit.
10.2

Cleaning

• Use non-abrasive cleaning agents.
• Clean the handling system as required with a soft cloth.
10.3 Lubrication
The handling system is lubricated initially.
Note
Trouble-free operation and a long service life require regular relubrication.
• Lubricate axes properly.
• Observe specifications for lubrication.
• Use appropriate grease gun. Accessories (è www.festo.com/catalogue).
Specifications
Lubrication interval
Lubricating grease
Amount of lubricant
Festo – GDCP-YXC-EN – 1506a – English
[km] 2500
See documentation for the axes (è www.festo.com/sp)
See documentation for the axes (è www.festo.com/sp)
115