4
Installation of the single-axis systems and the linear gantries
4.2
Mounting components
4.2.1
Mounting kit with adjustment possibility
2)
Structure
1
Adjusting piece
2
Screw (adjusting piece)
3
Washer (adjusting piece)
4
Nut (adjusting piece)
5
Bolt (lower part)
6
Lower part
7
Screw (support profile)
8
Slot nut (support profile)
9
Washer (lower part)
aJ
1)
Screw
(lower part)
aA
Upper part
aB
Screw (upper part)
Not included in delivery:
aC
Washer
aD
Screw M8
1) The screw and tightening torque are designed for mounting on steel.
...
4) and screws (9
2) Adjusting pieces (1
Requirements
– Number n of mounting components is known (è 4.1.2 Number n of mounting components).
– Mounting surface is prepared (è 4.1.3 Preparation of the mounting surface).
Mounting
Warning
Incorrect attachment. Entire product moves uncontrollably.
Injury due to impact or pinching. Damage to the product.
Use screws aJ and aD with strength class of at least 8.8.
Select screws aJ und aD
Mount product free of distortion.
Use only the mounting kits supplied.
Lock threaded connections.
Make sure the mounting surface is sufficiently strong to absorb the maximum
forces.
34
(1x)
7
(1x)
(1x)
(1x)
6
(1x)
(1x)
(2x)
(2x)
5
(4x)
(4x)
4
(2x)
(4x)
3
2
aD
(2x)
(2x)
...
aJ) accompany the shipment. The remaining parts are pre-assembled.
suitable for the installation situation.
8
9
1
Festo – GDCP-YXC-EN – 1506a – English
aJ
aA
aB
aC