Festo YXC Series Description page 75

5 Installation of the planar surface gantries and the three-dimensional gantries
Accompanying components
3
Cylindrical dowel pin
4
Screw
Requirements
– Y-module is mounted (è 5.3.2 Mounting of the Y-module EHMY-RP).
– Connecting shaft is mounted (è 5.6 Connecting shaft).
– Transport lock in the shipping crate is removed
(è 2.4.1 Securing in the transport protection crate ).
– Transport lock for lifting is mounted (è 2.4.2 Securing when lifting ).
Mounting
1. Place Z-module slowly and carefully onto the Y-module.
2. Press cylindrical dowel pins into the drill holes
of the adapters.
3. Lock screws with adhesive.
Observe safety instructions for adhesive in the
manufacturer's safety data sheet
(è www.festo.com/en/msds).
Festo – GDCP-YXC-EN – 1506a – English
3
4
5
(2x)
(6x ... 8x)
5
Adhesive Loctite 243
75