Festo YXC Series Description page 64

5 Installation of the planar surface gantries and the three-dimensional gantries
The height offset can be adjusted only with adjusting kits. For mounting kits without ad­
justment, the mounting surface must be correspondingly flat.
4. Align X-axis with energy chain to the underside.
Check: straightness 0.1 mm × (Hx/1000)
5. Fasten X-axis with energy chain to the mounting surface.
x = Hx/1000
64
y = By/1000
Festo – GDCP-YXC-EN – 1506a – English