7
Installation
7.2.5
Earthing points at the three-dimensional gantry
Connect earthing point 1 (protective earth connection) with low impedance to the earth potential of
the system.
Connect earthing point 2 of the X-module with low impedance to earthing point 3
Connect earthing point 4
compensator.
Connect earthing point 5 at the moment compensator with low impedance to earthing point 6 of the
Z-module.
Connect attachment component with low impedance to earthing point 7.
1) The earthing points 3 and 4 can be designed as one or two earthing points, depending on the order.
102
1)
of the Y-module with low impedance to earthing point 5 at the moment
1)
of the Y-module.
Festo – GDCP-YXC-EN – 1506a – English