Mounting Linear Gantry (Partially Mounted) - Festo YXC Series Description

4 Installation of the single-axis systems and the linear gantries
4.3

Mounting linear gantry (partially mounted)

Note
Incorrect mounting can cause malfunction and material damage. Tension in the handling
system. Deterioration of the technical characteristics (service life, wear). Failure.
• Have mounting be performed by qualified personnel.
• Use original parts (without unauthorised modifications).
• Mount parts in excellent condition (without damage).
• Align axes carefully. Avoid warping, misalignment and offset.
• Clean shafts/hollow shafts.
The coupling only grips without sliding on dry and grease-free shaft surfaces.
• Observe tightening torques.
Tolerance for tightening torques without indication of tolerance: ± 20 %.
For products without motor or with motors without brake:
Warning
Moving parts are not secured. Moving parts run uncontrollably into the lower end posi­
tion from their own dead weight.
Injury due to impact or pinching. Damage to the product.
• Bring vertically or diagonally moving parts into the lower end position in a controlled
manner.
• Secure vertically or diagonally moving parts.
Described is attachment of the Y-/Z modules to a linear gantry.
• Pay attention to transport locks (è 2.4 Transport locks).
Structure
Linear gantry YXCL
1
2
1
Y-module
Festo – GDCP-YXC-EN – 1506a – English
2
Z-module
39