Festo YXC Series Description page 91

5 Installation of the planar surface gantries and the three-dimensional gantries
For motor position in the middle
Otherwise with point 8. (è page 92).
Caution
Unfastened motor in the middle turns with the connecting shaft.
Injury due to impact or pinching. Damage to the product.
• Place motor outside the movement range.
• Fasten gear unit sufficiently (è 5.1.3 Preparation of the mounting surface).
1. Remove feather keys (if present) from the drive shafts of the gear unit.
2. Place motor outside the movement range.
3. Place drive unit with the rating plate downward.
è Motor turns to the right (positive direction
of rotation, view from front toward the mo­
tor shaft).
Gear unit turns to the right (view from left
onto the gear unit)
4. Fasten gear unit to the mounting surface.
5. Push couplings as far as possible onto the
drive shafts.
6. Tighten the screws lightly.
Check: The couplings are fixed on both sides.
Festo – GDCP-YXC-EN – 1506a – English 91