Installation; Mechanical Installation - Festo EGSL Operating Instructions Manual

EGSL
· Note the warnings and instructions on the product and in the relevant
operating instructions.
· Take the tolerance of the tightening torques into account. Unless otherwise
specified, the tolerance is ±20 %.
5

Installation

Mechanical installation

· Do not modify the screws and threaded
pins if not directly requested to do so in
these operating instructions.
· Mount the motor on the mini slide in
accordance with the assembly
instructions for the motor mounting kit
recommended in the catalogue.
For installation in a vertical or sloping position:
Warning
Falling masses can cause personal injury
and material damage (crushing).
If there is a power failure or if the spindle
nut breaks, the work mass will drop.
· Make sure that you use only motors
with an integrated holding brake.
· Check whether additional external
safety measures are required to
prevent damage due to spindle nut
fracture (e.g. toothed latches or
moving bolts).
· Make sure that the device is installed free of mechanical stress and sag
(evenness of bearing surface 0.05 % of stroke length).
· Position the EGSL so that its control sections can be reached.
Festo EGSL 1011a English
Fig. 2
Fig. 3
23