Assembly; Installation; Commissioning - Festo CPX-AP-I-4IOL-M12 Manual

Commissioning

Connection for system communication [XF20]
Socket M8, 4-pin, D-coded
Tab. 7: Connection for system communication
IO-Link Ports [X0] ... [X3] connection
M12 socket, 5-pin, A-coded
Tab. 8: IO-Link connection Ports
If there is a connection to other circuits at one of the connections for inputs or outputs, the circuits
must also comply with SELV/PELV.
5

Assembly

• Carry out assembly according to the automation system CPX-AP-I operating instructions è 1.1
Applicable documents.
6

Installation

• Carry out installation according to the automation system CPX-AP-I operating instructions è 1.1
Applicable documents.
• When connecting Devices Class A with 4 or 5-pin cables, do not connect pins 2 and 5.
7 Commissioning
• Commission the automation system CPX-AP-I in accordance with the operating instructions for the
automation system CPX-AP-I è 1.1 Applicable documents.
Festo — CPX-AP-I-4IOL-M12 — 2022-03a
Signal
1 RX– Received data –
2 TX+ Transmitted data +
3 RX+ Received data +
4 TX– Transmitted data –
Signal
1 L+ +24 V DC operating voltage supply PS
2 P24 +24 V DC load voltage supply PL
3 L– 0 V DC operating voltage supply PS
4 C/Q Standard IO (in SIO mode) or IO-Link communication (in
IOL mode)
5 N24 0 V DC load voltage supply PL
9