Festo YXC Series Description page 67

5 Installation of the planar surface gantries and the three-dimensional gantries
11.Mount connecting shaft (è 5.6 Connecting shaft).
On one side of the connecting shaft:
12.Open coupling.
13.Move both slides into the middle position:
– Slide offset ± 0.1 mm x (By/1000)
Note
Too much slide offset.
High wear and tension.
• Align slides with each other.
x = Hx/1000
14.Fasten open coupling of the connecting shaft (è 5.6 Connecting shaft).
15.Mount Y-module (è 5.3.2 Mounting of the Y-module EHMY-RP).
Festo – GDCP-YXC-EN – 1506a – English
y = By/1000
67