Festo YXC Series Description page 87

5 Installation of the planar surface gantries and the three-dimensional gantries
4. Push slide into the corresponding end position:
– The hollow shafts no longer turn when the clamping screws are tightened.
5. Push the drive shaft with the expanding man­
drel as far as possible into the hollow shaft.
6. Tighten clamping screws.
Screw size and tightening
torque
[Nm]
Festo – GDCP-YXC-EN – 1506a – English
EHMX-EGC-
50 80
M3 M5
1 7
120 185
M8 M10
14 60
87