Table of Contents
Advertisement
AC90 TENSION CONTROL FREQUENCY INVERTER MANUAL
Basic LED operation
●
It displays frequency 50.00Hz when stop. Here F0.09=100.00 setting will be taken as an example to explain the basic
LED operation.
4.3 Basic operation
Parameter initialization
●
After setting F0.19=1，parameter initialization is finished. Operation details as follows:
Core control mode selections
●
Four core control mode selections：
0: VC without PG
1: V/F without PG
2: VC with PG
3: V/F with PG
Here we set F0.00=0（VC without PG control）as an example to introduce it
Chart 4-1: Basic LED operation
Chart 4-2: Parameter initialization
Chart 4-3: Core control mode selections
37
BASIC OPERATION AND TRIAL RUN
Advertisement
Table of Contents
