Veichi AC90 Manual page 189

AC90 TENSION CONTROL FREQUENCY INVERTER MANUAL
Communication data address definition
●
This part is the address definition of communication data. It is used to control the frequency inverter running and fetch
frequency inverter mode information and frequency inverter relevant function parameter setting.
(1)AC90 serial function parameter address express rules
Take frequency inverter function parameter serial numbers as register address which are divided into the high byte and
the low byte two parts. The high byte expresses the function parameter group serial numbers. The low byte expresses
the inner serial numbers of each function parameter group. All need to be changed to hexadecimal.
Address domain high byte definition:
Parameter code no
F0 basic function parameter
F1 running control parameter
F2 quantum digital terminal parameter
F3 quantum analog terminal parameter
F4 keyboard and display parameter
F5 motor parameter
F6 VC control parameter
F7 torque control parameter
F8 V/F control parameter
F9 plus function parameter
FA malfunction protection parameter
Fb PID control parameter
FC multistep and PLC parameter
Fd communication function parameter
FE reserved
FF reserved
C monitor parameter
Communication control parameter
Attention: because it is possible that the parameters are frequently rewrited exists in the communication, EEPROM are
stored frequently. So its lifetime is cut down. As for the consumer, some function is unnecessary to store in the
Head add of this group of parameter
0x0000（not save in to EEPROM）
0x1000（save in to EEPROM）
0x0100（not save in to EEPROM）
0x1100（save in to EEPROM）
0x0200（not save in to EEPROM）
0x1200（save in to EEPROM）
0x0300（not save in to EEPROM）
0x1300（save in to EEPROM）
0x0400（not save in to EEPROM）
0x1400（save in to EEPROM）
0x0500（not save in to EEPROM）
0x1500（save in to EEPROM）
0x0600（not save in to EEPROM）
0x1600（save in to EEPROM）
0x0700（not save in to EEPROM）
0x1700（save in to EEPROM）
0x0800（not save in to EEPROM）
0x1800（save in to EEPROM）
0x0900（not save in to EEPROM）
0x1900（save in to EEPROM）
0x0A00（not save in to EEPROM）
0x1A00（save in to EEPROM）
0x0B00（not save in to EEPROM）
0x1B00（save in to EEPROM）
0x0C00（not save in to EEPROM）
0x1C00（save in to EEPROM）
0x0D00（not save in to EEPROM）
0x1D00（save in to EEPROM）
0x0E00（not save in to EEPROM）
0x1E00（save in to EEPROM）
0x0F00（not save in to EEPROM）
0x1F00（save in to EEPROM）
0x2100
0x3000 or 0x2000
184
BASIC OPERATION AND TRIAL RUN