Veichi AC90 Manual page 107

AC90 TENSION CONTROL FREQUENCY INVERTER MANUAL
Keyboard potentiometer upper limit corresponding setting: It set ratio of keyboard potentiometer upper limit.
F4.11 Upper LED display content while run
F4.12 Upper LED display content while stop
Upper LED display content while run: Set monitor content showed in the upper line of LED while running. The
content can be modified by "SET" key while running. Not save modification while power cut.Default to display LED "0"
digit setting after power on.
Upper LED display content while stop: Set monitor content showed in the upper line of LED while stop. The content
can be modified by "SET" key while stop. Not save modification while power cut.Default to display LED "0" digit setting
after power on.
LED "0" digit to "0000" digit setting
0: Given frequency
4: Output voltage
8: PID given value
C: Module temperature 1
F: ON/OFF state of input terminal Y
F4.13 Lower LED display content while run
F4.14 Lowest LED display content while stop
Only valid for keyboard with 2 line LED. Details refer to [F4.11-F4.12].
Rotate speed display
F4.15
coefficient
It sets the display coefficient of keyboard monitor item "machine speed" .100% is corresponding to motor rated speed.
F4.16 LCD language
LED "0" digit: LED display language
0: Chinese
1: English
LED"00" digit: output frequency selection
0: Aim frequency
1: Actual frequency
LED"000" digit: machine speed display selection
0: Actual speed
1: Aim speed
LED"0000" digit: reserved
1: Output frequency
5: Machine speed
9: PID feedback value
D: Module temperature 2
Setting range: 0.0-5000.0%
Setting range: 0000-1111
Setting range: 0000-FFFF
Setting range: 0000-FFFF
2: Output current
6: Set torque
A: Output power
E: ON/OFF state of input terminal X
Setting range: 0000-FFFF
Setting range: 0000-FFFF
102
Function Parameter specifications
Factory set: 3210
Factory set: 3210
3: Input voltage
7: Output torque
B: Bus voltage
Factory set: 3210
Factory set: 3210
Factory set: 0000
Factory set: 0000