Analog Terminal Parameters - Veichi AC90 Manual

AC90 TENSION CONTROL FREQUENCY INVERTER MANUAL
9.4 Analog terminal functions
F3.00 VS1 Lowest limit
VS1 Lowest limit
F3.01
corresponding setting
F3.02 VS1 upper limit
VS1 upper limit
F3.03
corresponding setting
F3.04 VS1 filter time
VS1 Lowest limit: It defines signal accepted by analog input terminal (VS1), Inverter deal voltage lower than this value
as lower limit.
VS1 lower limit corresponding setting: It defines ratio of VS1 lower limit.
VS1 upper limit: It defines signal accepted by analog input terminal (VS1), Inverter deal voltage higher than this value
as higher limit.
VS1 upper limit corresponding setting: It defines ratio of VS1 upper limit.
VS1 filter time: It is (VS1) input analog signal filter time to eliminate disturb signal. The longer filter time is, the stronger
anti-disturb force is. The shorter filter time is, the weaker anti-disturb force is. But respond speed will be quicker.
give frequency
F0.09 × F3.03
F0.09 × F3.01
F3.00
Analog give torque and tension, the relationship:
Give torque
F7.06
Input torque
upper limit
F7.07
Input torque
lower limit
F3.00
F3.05 VS2 Lowest limit
VS2 Lowest limit
F3.06
corresponding setting
F3.07 VS2 upper limit
Setting range: 0.00-10.00V
Setting range: 0.00-100.00%
Setting range: 0.00-10.00V
Setting range: 0.00-100.00%
Setting range: 0.00-10.00s
give frequency
F0.09 × F3.03
F0.09 × F3.01
F3.02 Input voltage
Anaiog give frequency show
200% torque
F9.04 Max
tension
Input voltage
F3.02
VS1 analog give torque/tension figure
Setting range: 0.00-10.00V
Setting range: 0.00-100.00%
Setting range: 0.00-10.00V
96
Function Parameter specifications
F3.00
Give tension
F3.00 F3.02
Factory set: 0.00V
Factory set: 0.00%
Factory set: 10.00V
Factory set: 100.00%
Factory set: 0.10s
F3.02
Input voltage
Input voltage
Factory set: 0.00V
Factory set: 0.00%
Factory set: 10.00V