Veichi AC90 Manual page 88

AC90 TENSION CONTROL FREQUENCY INVERTER MANUAL
Frequency
Start ACC rate of S
curve(F1.14)set as 100%
start
frequency
F1.16-F1.17
F1.18 ACC time 2
F1.19 DEC time 2
F1.20 ACC time 3
F1.21 DEC time 3
F1.22 ACC time 4
F1.23 DEC time 4
ACC time 2/3/4: When [F1.13] LED"0"digit is 0, it means the time need for output frequency ACC from 0.00Hz to max
frequency [F0.09]. When [F1.13] LED"0"digit is 1, it means the time need for output frequency ACC from 0.00Hz to
50.00Hz. Details refer to [F1.13].
DEC time 2/3/4: When [F1.13] LED "0"digit is 0, it means the time need for output frequency DEC from max frequency
[F0.09] to 0.00Hz. When [F1.13] LED "0"digit is 1, it means the time need for output frequency DEC from 50.00Hz to
0.00Hz.
ACC/DEC time details refer to [FC.31-FC.45].
JOG ACC/DEC time is set by [F1.33, F1.34]
ACC/DEC time table:
Terminal 2
OFF
OFF
ON
ON
If any unclear, please see FC parameter group multi steps time order fig.
F1.24 Emergency stop DEC time
Same as ACC/DEC time definition.
Emergency stop can be take effect by emergency stop terminal; details refer to [F2.00-F2.07]. While terminal control
two line run, whether carry out the orginal run order is decided by [2.13] LED "00" digit. Details refer to [F2.13].
Start ACC rate of S
curve(F1.14)set as 20%
ACC time
ACC/DEC curve
Setting range: 0.00-650.00s
Setting range: 0.00-650.00s
Setting range: 0.00-650.00s
Setting range: 0.00-650.00s
Setting range: 0.00-650.00s
Setting range: 0.00-650.00s
Terminal 1
OFF
ON
OFF
ON
Setting range: 0.01-650.00s
Aim frequency
DEC time
Reserved
ACC/DEC time
ACC/DEC time 1
ACC/DEC time 2
ACC/DEC time 3
ACC/DEC time 4
83
Function Parameter specifications
Start DEC rate of S
curve(F1.15)set as 100%
Start DEC rate of S
curve(F1.15)set as 20%
Factory set: 10.00s
Factory set: 10.00s
Factory set: 10.00s
Factory set: 10.00s
Factory set: 10.00s
Factory set: 10.00s
Factory set: 10.00s
Time