Pid Parameters; Communication Control Function Parameters - Veichi AC90 Manual

AC90 TENSION CONTROL FREQUENCY INVERTER MANUAL
Input terminal on/off show diagram:
X1 state
X2 state
X3 state
X4 state
Output terminal on/off show diagram:
Y1 state
Y2 state
TA TB
TC state
Reserved

9.13 PID parameters

PID control is used for process control mode normal. For the aim of that the object which be controlled is stabilized as
the PID given, it adjusts inverter output frequency to form passive feedback PID adjustment by series of proportional,
integral, differential calculation by difference between the feedback of that be controlled and the inverter PID given.
Fb.00 PID give signal source
Use to set the input channel of PID controller given signal.
0: Keyboard number given PID Decided by [Fb.01] setting.
1: Keyboard potentiometer
2: Terminal VS1 voltage analog
3: Terminal VS2 voltage analog
4: Terminal AS current analog
5: Terminal PUL pulse signal
input terminal on
output terminal on
Setting range: 0-8
132
Function Parameter specifications
X8 state
X7 state
X6 state
X5 state
input terminal off
Reserved
Reserved
Reserved
Reserved
output terminal off
Factory set: 0