Veichi AC90 Manual page 31

AC90 TENSION CONTROL FREQUENCY INVERTER MANUAL
AC90-T3-450T
AC90-T3-500T
AC90-T3-560T
Note: For DC reactor, input filter, output filter and other components specification details and circuit mode, please refer
chapter 7 "peripheral equipments and options".
Control loop terminals
Control loop terminals array
●
Sort Terminal
TA
Passive
TB
connection output
TC
Y1
State output
Y2
+24V
Auxiliary
power supply
COM
X1
X2
X3
Multi-function
contact input
X4
X5
X6
1000A 2000A
1000A 2000A
------ 2000A
Chart 3-9: Suggested mains fittings for 3-phase 380V machine
Name
Normally-open contact
Normally-closed contact
Common contact
Collector open output 1
Collector open output 2
Auxiliary power output +
Auxiliary power output -
Multi-function contact
input 1 (forward)
Multi-function contact
input 2 (reverse)
Multi-function contact
input 3（forward jog）
Multi-function contact
input 4（reverse jog）
Multi-function contact
input 5（free stop）
Multi-function contact
input 6（fault reset）
BASIC OPERATION AND TRIAL RUN
DCL-1000
DCL-1200
DCL-1200
Function definition
Can set the action-object by programme.
Max contact capacity:3A/240VAC 5A/30VDC
Can set the action-object by programme.
Max contact capacity:DC30V/50mA
Max output: 24VDC/100mA.
Build-in photoelectric converter can set the
action-object by programme.
Input condition: Max DC30V/8mA.
Note:
Factory setting is common-collector characteristic
input. If need common-emitter characteristic input,
Please remove the short connector between"+24V"and
"PLC", then use the short connector to connect "PLC"
and "COM".
26
------ ------
------ ------
------ ------