Connecting Fiber Optic Cable To Test Port - Viavi T-BERD/MTS 2000 User Manual

Chapter 2 Starting up
Connecting fiber optic cable
WARNING
Viavi declines responsibilities of connector damages if a poor quality con-
nector is used or APC to PC connections made. Test port connector repair
will be charged
WARNING
All the universal connectors are available on the OTDR Modules, except on
the LA Module.

Connecting Fiber optic cable to test port

After ensuring proper cleaning of both end connectors, follow the below steps in order
to correctly and safely connect the optical fiber into the test port:
1 Carefully align the connector and test port to prevent the fiber end from touching
the outside of the port and scratching the end face.
NOTE
If your connector features a keying mechanism, ensure that it is correctly fit-
ted into the test port's insert.
2 Push the connector to firmly place it inside ensuring physical end face contact.
NOTE
If your connector features a screw-on sleeve, tighten the connector to firmly
maintain the fiber in place. Do not over tighten as this will damage the fiber
and the test port.
WARNING
Never force the connector ferrule or insert it with an angle into the test port
adapter. Mechanical stress may permanently damage the ceramic sleeve of
the adapter or the end face of the connector. A new adapter purchase only
will get the unit back to operation
12 User Manual 77000010208 Rev. 012